1 comment on “Chimara Synthesis bC6 [Crystal] Review”

Chimara Synthesis bC6 [Crystal] Review

A big thank you to Arthur Vanderbilt (http://arthurvanderbilt.org) for this review of the Chimara Synthesis bC6 [Crystal] Review

Construction and Controls

The Chimara Synthesis bC6 is a hand-built (in the U.K.) synthesizer with a built-in 16-step sequencer. My model is encased in clear, CNC-machined acrylic. It has a brushed aluminum top. A distinctive red circuit board is visible through the clear bottom of the case. Controls on the top of the case include six knobs, an LED, a button, and a 1/8″ stereo output jack suitable for headphones or use as a line out. Two hex screws hold the top cover down. Remove them and the cover for access to the three AAA batteries. External power is not available. The bottom of the case has an on-off switch.


The synthesizer has three primary modes: a single-shot mode where each note is triggered by the button, an auto-repeat mode where a single note plays over and over and a sequencer playback mode. Switching between modes is accomplished by turning the volume all the way down and pressing the button. A flashing LED indicates single-shot mode, a pulsing LED indicates auto-repeat mode and a solid LED indicates sequence playback mode.

The sequencer continuously records the last sixteen notes played in single-shot mode. All parameters except volume are recorded. Pressing the button stops playback or starts playback with the settings as recorded. Settings can be changed during playback, affecting the output directly, and then reset by stopping and starting the sequencer. Holding the button down for more than two seconds will put the sequencer into variable speed mode. This will keep the volume knob from affecting the volume and make it instead affect the sequencer’s rate of playback.

The next knob clockwise is a waveform selector for both the LFO and the VCO. The knobs range is divided into quadrants, each quadrant selecting a different LFO waveform. Each of these quadrants is again divided into quadrants, each quadrant selecting a different VCO waveform. This arrangement allows the selection of any combination of LFO/VCL waveforms with a single knob.

The knob to the right of the button controls the envelope. The knob to the left of the button controls the LFO rate. The next knob clockwise controls the amount of either frequency or amplitude modulation affected by the LFO. The final knob, to the left of the jack controls VCO frequency (pitch).

My Impressions

This synthesizer is a jewel. I haven’t been able to keep my hands off of it since I received it in the mail. The variety of sounds and textures that you can create is amazing. Everything from modulated warbles to clear bell tones. It packs a lot of features and capability into a compact and inexpensive package. It’s useful for glitch, drone, noise, improvisation and just about any application that doesn’t need a hard MIDI clock sync or exacting pitch selection and intonation. The construction is top-notch and it’s beautiful to look at. The only gripe I had was that it came with the wrong size hex wrench so I had to go find my set in the garage to get the top off. A small price to pay, because as soon as I got the batteries in, I was hooked.


http://www.youtube.com/watch?v=OXkfLHuDUp4
http://www.youtube.com/watch?v=otLz_f0YVpE

2 comments on “10 steps to make a minor chord cadence fly”

10 steps to make a minor chord cadence fly

SoundPrism Pro - Audanika GmbH

http://static.evernote.com/noteit.js Clip to Evernote

5 comments on “Novation coming to the market with a V-Station (HD) app?”

Novation coming to the market with a V-Station (HD) app?

Thanks to Marc for this tip off. Gearjunkies have the scoop.

http://static.evernote.com/noteit.js Clip to Evernote

11 comments on “Nanoloop comes to Android”

Nanoloop comes to Android

That explains why it has been quiet on iOS for a little while. Nanoloop is on the Android marketplace now.

TCTD gets the scoop.

http://static.evernote.com/noteit.js Clip to Evernote

0 comments on “iPads as Wi-fi MIDI controllers”

iPads as Wi-fi MIDI controllers

http://static.evernote.com/noteit.js Clip to Evernote

3 comments on “BeatStudio Secret Test Labs”

BeatStudio Secret Test Labs

Whilst this is fun (and short) it doesn’t really show what the app does so I’m hoping we can get to see another video shortly?

http://static.evernote.com/noteit.js Clip to Evernote

0 comments on “PianoAngel update on the way”

PianoAngel update on the way

An update is on the way for PianoAngel. Here’s what to expect:

  • Record playing to M4A audio file which can be fetched via iTunes file sharing or sent via email
  • Upload recording to SoundCloud
  • CoreMidi support for sending/receving MIDI notes (require iOS >= 4.2)
  • Replaced “Overall Volume” setting by “Volume Boost” which default is minimum and ineffective when headphone is plugged in (to avoid audio distortion)
  • Fixed pixelized text in main screen on iPad
  • Improved piano samples again for a more smoothed sound.

PianoAngel - Better World Studio

http://static.evernote.com/noteit.js Clip to Evernote

2 comments on “pellegrini space time keyboard for iPad demo”

pellegrini space time keyboard for iPad demo

I didn’t know about this app so I tried to look it up on iTunes but couldn’t find it. If anyone knows about it please get in touch.

http://static.evernote.com/noteit.js Clip to Evernote

5 comments on “Sinusoid update”

Sinusoid update

Sinusoid gets an update:

  • Revised bpm tempo controls. Touch text field for number pad input. 
  • Song starts from beginning upon loading.

Sinusoid - Erik Sigth
http://static.evernote.com/noteit.js Clip to Evernote

1 comment on “FL Studio 10 arrives, so where is the Mobile one?”

FL Studio 10 arrives, so where is the Mobile one?

Whilst it is of course great to see the newest version of FL Studio I’m still wondering where the mobile version is that got leaked a little while ago.

http://static.evernote.com/noteit.js Clip to Evernote